Search
Filters
Close

Motion Controller and Dimmer

SKU: BKDLMOTION
List Price:  $169.99

CONTROL YOUR LIGHTS LIKE NEVER BEFORE

The Trex Motion Controller is a powerful addition to any lighting project. It puts you in control of how and when your lights come on, and has unique features not offered by other controllers. This 1-3/4” diameter controller can be used to replace the timer and dimmer, and it adds the functionality of a motion controller. Using the supplied remote, the installer can program several aspects of the lighting system to get a perfect setup. The photocell sensor is the key element for control, once it senses darkness it will activate the lights for the exact amount of time you need them on. Have to put the sensor somewhere that doesn’t receive full sunlight? No problem, the photocell sensitivity is adjustable to compensate for less-than-ideal conditions. You can also have your lights come on when the controller senses motion. The sensitivity of this sensor is also adjustable, in the event unwanted motion is causing the lights to activate. Lastly, this little device can also dim the lighting circuit to make it one of the most complete low-profile controllers available in outdoor deck lighting. So get rid of that bulky timer on the top side of your deck and take control of your lighting system!

 

TREX THROUGH AND THROUGH  

Like most Trex products, the Trex Motion Controller is manufactured in the USA. It works will all Lighthub-equipped Trex lighting installations and can be retrofitted into existing installations. It is covered by a 1-year warranty. Note: Like other Lighthub products, the leads of this unit can be cut & stripped and it can be hard wired into systems that are not utilizing the plug and play features of the program. Use of a Trex Transformer is required.

 

WHATS IN THE BOX

Every box contains a Motion Controller unit, a programming remote with batteries, a 5’ male-male Lighthub wire, screws for installation to composite or wood, an adhesive for installation to metal or other surfaces and complete installation and programming instructions.

 

Don't forget to order a transformer for your new Outdoor Lighting. Find out how many you'll need.

Products specifications
Weight(lbs) 1.9
Height(Inches) 6.5
Width(Inches) 2
Depth(Inches) 1.4
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent

CONTROL YOUR LIGHTS LIKE NEVER BEFORE

The Trex Motion Controller is a powerful addition to any lighting project. It puts you in control of how and when your lights come on, and has unique features not offered by other controllers. This 1-3/4” diameter controller can be used to replace the timer and dimmer, and it adds the functionality of a motion controller. Using the supplied remote, the installer can program several aspects of the lighting system to get a perfect setup. The photocell sensor is the key element for control, once it senses darkness it will activate the lights for the exact amount of time you need them on. Have to put the sensor somewhere that doesn’t receive full sunlight? No problem, the photocell sensitivity is adjustable to compensate for less-than-ideal conditions. You can also have your lights come on when the controller senses motion. The sensitivity of this sensor is also adjustable, in the event unwanted motion is causing the lights to activate. Lastly, this little device can also dim the lighting circuit to make it one of the most complete low-profile controllers available in outdoor deck lighting. So get rid of that bulky timer on the top side of your deck and take control of your lighting system!

 

TREX THROUGH AND THROUGH  

Like most Trex products, the Trex Motion Controller is manufactured in the USA. It works will all Lighthub-equipped Trex lighting installations and can be retrofitted into existing installations. It is covered by a 1-year warranty. Note: Like other Lighthub products, the leads of this unit can be cut & stripped and it can be hard wired into systems that are not utilizing the plug and play features of the program. Use of a Trex Transformer is required.

 

WHATS IN THE BOX

Every box contains a Motion Controller unit, a programming remote with batteries, a 5’ male-male Lighthub wire, screws for installation to composite or wood, an adhesive for installation to metal or other surfaces and complete installation and programming instructions.

 

Don't forget to order a transformer for your new Outdoor Lighting. Find out how many you'll need.

Products specifications
Weight(lbs) 1.9
Height(Inches) 6.5
Width(Inches) 2
Depth(Inches) 1.4
Customers who bought this item also bought

LED WELL LIGHT

LED Well Light - In-Ground Landscape Lighting
List Price:  $39.99
Discount Price:  $20.00

LED SPOTLIGHT

LED Spot Light Landscape Lighting | Order Online
List Price:  $69.99
Discount Price:  $35.00

LIGHTHUB MALE EXTENSION WIRE

Trex Lighthub Extension Cord
List Price:  $24.99